Choosing a colour temperature for downlights

Colour temperature describes how warm or cool light looks and is measured in kelvin (K). Warm white (3000 K) suits most homes, extra warm white (2700 K) suits bedrooms and living rooms, and cool white (4000 K) suits kitchens, bathrooms and work areas. Keep one setting per space and choose high colour rendering (CRI 90) where colour matters.

Key points

  • Lower kelvin numbers look warmer and more yellow. Higher numbers look cooler and whiter.
  • Warm white (3000 K) is the safest choice for most rooms.
  • Use one colour temperature for all the downlights you can see at once.
  • Switchable fittings let you set the colour when they are installed.
  • Choose CRI 90 or above for kitchens and bathrooms.
  • Standard LEDs stay the same colour when dimmed, unlike halogen.

What colour temperature means

Colour temperature describes the colour of white light, from warm and yellow to cool and blue. It is measured in kelvin (K). The lower the number, the warmer the light looks. The higher the number, the cooler and whiter it looks.

The scale comes from the colour a material glows as it is heated, which is why the numbers can feel back to front. A candle flame sits at the very warm end, below 2000 K, and a clear blue sky can be well above 6000 K. Lighting for homes usually sits between 2700 K and 6000 K.

Colour temperature is separate from brightness. A 2700 K fitting and a 4000 K fitting can give the same amount of light, measured in lumens, although the cooler one can look brighter to the eye. For brightness, see how bright your downlights should be.

You will also see names for each setting. There is no fixed standard for these names, so rely on the kelvin figure. On this site, extra warm white means 2700 K, warm white means 3000 K, cool white means 4000 K and daylight means 6000 K.

Which colour temperature for each room

The same kitchen looks noticeably different at each setting. Use the switch to compare them. Screens vary, so treat this as a guide.

Colour temperature Looks like Good for Less suited to
Extra warm white (2700 K) Old filament bulbs. Soft and cosy. Bedrooms, living rooms, dining areas, snugs Kitchens and work areas where you need to see detail
Warm white (3000 K) Halogen spotlights. Warm but clean. Most rooms, including living rooms, halls, landings and kitchens with warm finishes Garages and workshops
Cool white (4000 K) Crisp and neutral. Kitchens with white or grey finishes, bathrooms, utility rooms, home offices Bedrooms and living rooms in the evening
Daylight (6000 K) Blue-white, like an overcast day. Garages, workshops, storage areas Living spaces, where it can feel harsh

Living rooms and bedrooms usually feel best at 2700 K or 3000 K, especially in the evening. See our living room and bedroom downlights.

Kitchens can go either way. 3000 K keeps a kitchen feeling part of the home, while 4000 K gives a crisper light for preparing food. Our kitchen downlight guide covers task lighting over worktops.

Bathrooms work at 3000 K for a relaxed feel or 4000 K for shaving and make-up. Halls and landings usually sit at 3000 K so they match the rooms around them.

Mixing colour temperatures in open-plan spaces

Mismatched colour temperatures are most obvious where you can see several areas at once. A 4000 K kitchen next to a 2700 K dining area can make one look blue and the other orange.

  • Pick one colour temperature for the whole space. 3000 K is a good compromise for a kitchen-diner or kitchen-living room.
  • Put the kitchen and living areas on separate dimmers, so you can turn the kitchen up for cooking and down in the evening.
  • If you do want different settings, keep them in clearly separate areas on separate switches, and keep the difference small, such as 3000 K and 4000 K. Avoid mixing 2700 K and 6000 K in one space.
  • Match other light sources. Under-cabinet lights, pendants and lamps should be close to the downlights in colour temperature.

Buy all the downlights for one space from the same range. Two fittings with the same kelvin figure from different ranges can still look slightly different side by side.

Switchable colour temperature fittings

A switchable (CCT) fitting lets you choose the colour temperature from a set of options, such as 3000 K, 4000 K and 6000 K. It is a useful choice if you are unsure, or if you want every fitting in the house to be the same model even where rooms need different settings.

Most switchable downlights have a small selector switch on the fitting or its driver, set before the fitting goes into the ceiling. Changing it later means taking the fitting down with the circuit switched off at the consumer unit, or asking your electrician. Some fittings change setting when you switch the wall switch off and on in a set pattern. Check the product details to see which method a fitting uses.

Smart fittings go further. You can change the colour temperature across a range, such as 2700–6000 K, from an app, a voice assistant or a schedule. That lets you use cooler light in the morning and warmer light in the evening. Smart fittings are usually wired to a plain on/off switch in place of a dimmer. Browse our smart downlights.

Colour rendering and why it matters

Colour temperature tells you the colour of the light itself. Colour rendering tells you how accurately that light shows the colours of things around it. It is measured with the colour rendering index (CRI), on a scale up to 100. Daylight and filament bulbs score close to 100.

A light with poor colour rendering can make food look dull, skin look grey and similar colours hard to tell apart. CRI 80 is a common minimum for indoor lighting. High colour rendering (CRI 90) is worth choosing where colour matters.

  • Kitchens, so meat, fruit and vegetables look natural and you can judge when food is cooked.
  • Bathrooms, for shaving, make-up and checking skin tone in the mirror.
  • Dressing areas, so clothes look the colour they will outdoors.
  • Rooms with artwork, strong paint colours or natural wood.

Some specifications also give an R9 value. This measures how well a light shows strong reds, which affect how skin, meat and red fruit look. Higher is better.

Colour rendering and colour temperature are independent. A warm fitting can have poor colour rendering and a cool fitting can have excellent colour rendering, so check both.

Dimming and warmth

Halogen and filament bulbs turn warmer and more orange as you dim them. Standard LED downlights keep the same colour temperature at every brightness, so a 4000 K fitting dimmed low can look grey and flat in the evening. This is one reason to choose 2700 K or 3000 K for rooms you dim often.

Two types of fitting get closer to the halogen effect. Dim-to-warm fittings shift towards a warmer colour, often around 2000 K or below, as they dim. Smart fittings can be set to a warmer colour from an app when you turn them down.

Dimming also needs the right dimmer. Most LED downlights dim best on a trailing-edge dimmer. Our guide to dimmers and LED flicker explains how to check the one you have.

How to choose

If you are still unsure, these rules of thumb cover most homes.

  1. Start with warm white (3000 K) unless you have a reason to change.
  2. Go warmer (2700 K) for bedrooms and rooms you mainly use in the evening.
  3. Go cooler (4000 K) for kitchens with cool finishes, bathrooms, utility rooms and work areas.
  4. Keep one colour temperature for everything you can see at once.
  5. Choose CRI 90 or above in kitchens and bathrooms.
  6. Choose a switchable fitting if you want to decide on the day.

When you are ready, answer a few questions and we’ll show what fits. Our complete downlight buying guide covers sizes, safety ratings and glare.

Questions

Is 3000 K or 4000 K better for a kitchen?

Both work. Warm white (3000 K) keeps a kitchen feeling homely and suits wood and warm colours. Cool white (4000 K) gives a crisper light for preparing food and suits white, grey and stainless finishes. In an open-plan kitchen-living room, 3000 K is usually the easier choice. Whichever you choose, look for CRI 90 so food looks natural. See our kitchen downlights.

What colour temperature is best for a bathroom?

Warm white (3000 K) gives a relaxed feel, and cool white (4000 K) gives clearer light for shaving and make-up. 4000 K suits a busy family bathroom, and 3000 K suits an en-suite you mainly use in the evening. Choose CRI 90 so skin tones look natural, and check the IP rating for each zone. See our bathroom downlight guide.

Is 2700 K the same as warm white?

Not quite. Warm white is a name with no fixed definition, and brands use it for anything from about 2700 K to 3000 K. On this site, 2700 K is extra warm white and 3000 K is warm white. The difference is small but visible side by side, so always compare the kelvin figure.

Can I mix 3000 K and 4000 K downlights?

You can, as long as they are in clearly separate areas, such as a 4000 K utility room and a 3000 K hallway. Avoid mixing them in one space you see all at once, as the difference is noticeable. If you need both in an open-plan room, put each area on its own switch.

What does CCT mean on a downlight?

CCT stands for correlated colour temperature, the technical name for colour temperature in kelvin. A CCT switchable downlight lets you choose between settings, often 3000 K, 4000 K and 6000 K, usually with a small switch on the fitting or driver that is set before installation. See CCT in our glossary.

What CRI should downlights have?

CRI 80 is a common minimum for indoor lighting and is fine for halls and landings. Choose CRI 90 or above for kitchens, bathrooms, dressing areas and rooms with artwork, where accurate colour matters. CRI is independent of colour temperature, so a warm fitting can have high or low colour rendering. See CRI explained.

Do LED downlights get warmer when dimmed?

Standard LED downlights keep the same colour temperature when dimmed. Halogen turns more orange as it dims. Dim-to-warm LED fittings imitate that effect, and smart fittings let you choose a warmer colour from an app. If you dim a room often, a 2700 K or 3000 K fitting keeps it feeling warm.

Is daylight (6000 K) good for a home?

Daylight (6000 K) suits garages, workshops and storage areas where you want maximum clarity. In living rooms and bedrooms it usually feels cold and clinical, especially in the evening. If you want crisp light in a kitchen or bathroom, cool white (4000 K) is usually a more comfortable choice.

The Downlight Co. · All downlights · Guides · Help · Basket