For a standard 2.4 m ceiling, space downlights about 1.2 m to 1.5 m apart and half that distance from the walls. Divide the room's length and width by the spacing to get the number in each direction. Then check the total lumens against the floor area, and add lamps or task lights where you need them.
For a standard 2.4 m ceiling, most rooms need downlights about 1.2 m to 1.5 m apart, with the outer lights about half that distance from the walls. A 4.5 m by 3.5 m living room works out at 6. A 4 m by 3 m kitchen usually needs 6 to 8, plus lighting under the wall units.
The calculator does the maths for you. Enter your room size to get a suggested grid you can hand to your electrician.
[calc:howmany]
The rest of this guide explains the rules behind it, so you can adjust the layout to your furniture, your ceiling and the way you use the room. If you'd rather start with the fittings, answer a few questions and we'll show what fits.
Start with downlights about 1.2 m to 1.5 m apart, measured centre to centre. Use the closer end in kitchens, bathrooms and anywhere you need bright, even light. In living rooms and bedrooms, where lamps do some of the work, the wider end, or a little beyond it, is fine.
To turn that into a layout, work on each direction separately.
[diagram:spacing]
This keeps the gaps between lights equal and the edges of the room as bright as the middle. It works for most rectangular rooms. If a position lands on a joist, moving that light a few centimetres won't be noticed, as long as you keep the row straight.
Half the spacing from the walls usually works out at about 0.6 m to 0.75 m. That puts light near the edges of the room without the beam hitting the walls hard.
If you place downlights much closer to a wall, the beam lands on the wall in a bright arc, known as scalloping. That can look good on a textured or feature wall, and it is how wall washing works. On a plain wall, or one with pictures or a TV, it often looks accidental. Keep downlights clear of the tops of wardrobes, tall units and curtain tracks too.
Kitchens follow a different rule. Lights over worktops go roughly above the front edge of the worktop, so you don't stand in your own shadow. Our kitchen downlights guide covers that layout.
Lumens (lm) measure how much light a fitting gives out. Watts only tell you how much power it uses. To judge whether a layout will be bright enough, add up the lumens of all the downlights and divide by the floor area in square metres. The answer, in lumens per square metre, is a simple way to compare a plan with what the room needs.
For example, 6 downlights at 500 lm each give 3,000 lm. In a 15.75 m² living room that is about 190 lm per m².
The starting points in the table below are our own rough guide for downlights as the main light. Treat them as a planning aid. A room with dark walls and floors will need more light, a pale room less, and a dimmer lets you turn a bright layout down when you don't need it. Our guide to downlight brightness goes into more detail.
The table gives typical layouts for a 2.4 m ceiling, using wide-beam downlights at about 500 lm each, which is the lower end for a 6 W fitting. Check the lumen figure of the fitting you choose and adjust.
| Room (example size) | Floor area | Starting point | Downlights at 500 lm | Layout idea |
|---|---|---|---|---|
| Hallway, 1.2 m by 5.0 m | 6 m² | 150–300 lm per m² | 3 (250 lm per m²) | One line down the middle, about 1.7 m apart |
| Bedroom, 3.5 m by 3.0 m | 10.5 m² | 100–200 lm per m² | 4 (190 lm per m²) | 2 by 2 on a dimmer, with bedside lamps |
| Living room, 4.5 m by 3.5 m | 15.75 m² | 150–250 lm per m² | 6 (190 lm per m²) | 3 by 2 on a dimmer, with lamps |
| Kitchen, 4.0 m by 3.0 m | 12 m² | 300–400 lm per m² | 6 to 8 (250 to 333 lm per m²) | Over the worktop edges, plus under-cabinet lights |
| Bathroom, 2.5 m by 2.0 m | 5 m² | 250–350 lm per m² | 3 (300 lm per m²) | Over the shower, the basin and the centre |
| Home office, 3.0 m by 2.5 m | 7.5 m² | 300–400 lm per m² | 4 (267 lm per m²), plus a desk lamp | 2 by 2, placed so they don't reflect in your screen |
In bathrooms, the position of each light also depends on the zones around the bath and shower. Read our bathroom zones and IP ratings guide before you finalise a plan.
The rules of thumb above assume a 2.4 m ceiling. As the ceiling gets higher, each beam spreads wider before it reaches the floor, but the light is spread more thinly.
On a sloping ceiling, such as in a loft conversion, a fixed downlight points at right angles to the slope, so its light lands at an angle. Adjustable downlights let you tilt the beam back towards the floor or onto a wall. Check the depth above as well, as there is often little space between the plasterboard and the roof.
The beam angle is how wide the cone of light is. The edge of the beam is where brightness has fallen to half of what it is at the centre, so some light spills beyond it.
[diagram:beam]
From a 2.4 m ceiling, a kitchen worktop is about 1.5 m below the light. At that distance a 36° beam covers a circle roughly 1 m across, and a 60° beam covers a circle roughly 1.7 m across.
Wide beams, around 60° or more, give even general light and suit the spacing in this guide. Narrow beams, around 40° or less, make distinct pools of light. They suit highlighting a picture, a dining table or an island. For general lighting they need to be closer together, or the floor between them looks patchy. Beam angles vary a lot, especially between GU10 bulbs, so check the product details before you plan the spacing.
A room lit only by a ceiling grid can feel flat, especially in the evening. Most rooms work better with several layers you can switch separately.
[photo:living]
Put different groups on different switches, such as the lights over a dining table separate from the rest of an open-plan room. Plan the switching before your electrician starts, as it affects the wiring. See our living room downlights for fittings that suit a layered scheme.
Living room, 4.5 m by 3.5 m. Using 1.5 m spacing, 4.5 ÷ 1.5 = 3 lights along the length, 1.5 m apart and 0.75 m from the end walls. Across the width, 3.5 ÷ 1.5 = 2.3, which rounds to 2 lights, 1.75 m apart and about 0.9 m from the walls. That is 6 downlights. At 500 lm each, 3,000 lm over 15.75 m² is about 190 lm per m², inside the starting range. Put them on a dimmer and add lamps.
Bedroom, 3.5 m by 3.0 m. 3.5 ÷ 1.5 = 2.3, which rounds to 2, and 3.0 ÷ 1.5 = 2. That gives 4 downlights, 1.75 m apart one way and 1.5 m the other. 2,000 lm over 10.5 m² is about 190 lm per m². If the grid puts a light over the pillows, shift that row towards the foot of the bed or choose a low-glare downlight, so it doesn't shine into your eyes.
Hallway, 1.2 m by 5.0 m. A single line down the middle works. 5.0 ÷ 1.5 = 3.3, which rounds to 3 lights, about 1.7 m apart and 0.8 m from each end. 1,500 lm over 6 m² is 250 lm per m². Make sure the stairs are well lit too, with light at the top and bottom of the flight.
On a standard 2.4 m ceiling, about 1.2 m to 1.5 m apart, measured centre to centre. Use the closer end in kitchens and bathrooms, and the wider end in living rooms and bedrooms where lamps add light. Narrow-beam fittings need to be closer together than wide-beam ones to avoid patchy light.
About half the spacing between them, which on a 2.4 m ceiling is usually 0.6 m to 0.75 m. This keeps the edges of the room bright without a hard arc of light on the wall. In kitchens, line the lights up over the front edge of the worktop instead, so you don't cast a shadow on what you're doing.
Using 1.5 m spacing, 4 ÷ 1.5 rounds to 3, so a 3 by 3 grid of 9 downlights about 1.3 m apart. At 500 lm each that gives about 280 lm per m², which suits a kitchen. A living room might have 6 in a 3 by 2 grid, about 190 lm per m². A bedroom might have 4, about 125 lm per m², with bedside lamps.
As a rough starting point for downlights as the main light, aim for about 100–200 lm per m² in bedrooms, 150–250 in living rooms, 250–350 in bathrooms and 300–400 in kitchens and home offices. These are our own planning figures. Darker rooms need more, and a dimmer lets you turn a bright layout down. See lumens in our glossary.
Usually fewer, but brighter. On a higher ceiling each beam spreads further, so you can space lights a little wider, roughly in proportion to the height. At 3 m, about 1.5 m to 1.9 m apart works. Because there are fewer lights over the same floor, each one needs more lumens to keep the room as bright.
Yes. Too many makes a ceiling look cluttered and a room feel harsh and over-lit. It also means more holes to cut and, where the ceiling needs them, more fire-rated fittings. Use the spacing rules, check the lumens, and add lamps and task lights in place of extra downlights. A dimmer helps if you're between two layouts.
Keep them away from the area directly above the pillows, where they shine into your eyes when you lie down. A 2 by 2 grid shifted towards the foot of the bed works in most rooms, with bedside lamps for reading. Low-glare fittings help. See our bedroom downlights for suitable options.
For general lighting, a wide beam of around 60° or more gives even light with the spacing in this guide. Narrower beams, around 40° or less, make pools of light and suit accent lighting over a table, island or artwork. If you use narrow beams for general light, space them closer together.
The Downlight Co. · All downlights · Guides · Help · Basket